Certa Mini Circular saw Manual de Instruções descarregar pdf (Página 38)

ENGLISH

ASSEMBLY / ADJUSTMENT SETUP

WARNING!

Always unplug saw from power supply before any of the following operations.

ADJUSTING THE DEPTH OF CUT

The depth of cut should be set ac-

cording to the thickness of the

workpiece.

Loosen the lever to unlock the

saw shoe (PIC5).

Move the saw shoe into the desired

position. The corresponding depth of

cut can be read from the scale.

Tighten the lever to lock the saw shoe

in place.

Set depth adjustment of saw such

that one tooth of the blade projects

below the workpiece as shown in PIC 6.

CUTTING ANGLE ADJUSTMENT (PIC 7)

This tool can be set to bevel angles

between 90° and 45°.

Loosen the locking knob to unlock

the saw shoe.

Move the saw shoe into the desired

position. The corresponding bevel

angle can be read from the scale.

Tighten the locking knob to lock the

saw shoe in place.

ATTACHING THE BLADE

To avoid the spindle rotation press the

“spindle lock button” (PIC 8).

Loosen and remove the blade

retaining screw by turning the hex

wrench counter- clockwise. Remove the

outer washer.

PIC 8

PIC 7

PIC 6

PIC 5

Spindle Lock Button

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Sem comentários

Certa Mini Circular saw Manual de Instruções Página 38